![]() Run the udev rules installation script in tools/linux/install.sh. If the hardware folder does not exist, please create one. In Linux, you must give yourself access to the Dial out group and run a script to set permissions:Ĭopy the Arduino_STM32 folder to the hardware folder in your Arduino sketches folder. So upload a the Maple mini blink sketch from examples\Digital\Blink and the Maple serial device should now be available on the Port menu. Note: If you do not see a Maple Serial com device, this is probably because the Maple mini has not been loaded with the blink sketch. Re-start the Arduino IDE, and select the appropriate board from the "Tools" -> "Board menu", and select the appropriate Com port for your Maple mini or serial upload device. The batch file and wdi-simple.exe do the clever stuff to convince Windows 7 or newer, that it should use its drivers with the Maple serial and DFU devices. However the built in drivers need to be associated with the USB ID of the Maple serial and DFU devices. Windows comes pre-installed with a compatible Serial USB driver and a DFU (upload) driver. ![]() Note: This doesn't actually install drivers. Please open a cmd window (run as administrator), navigate to the folder: /drivers/win/ and run: install_drivers.bat. If using Maple or Maple mini, you need to install drivers for the Serial and DFU (upload devices). In Windows, you must force the drivers to load Ĭopy the Arduino_STM32 folder to My Documents/Arduino/hardware (Note: if the hardware folder doesn't exist you will need to create it). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |